v3.01.119 SSLL119 — Beams subjected to distributed moments

Summary:

The objective of this test is to validate the application of moments distributed on the beams.

Note: The moments distributed over the beams are affected by the commands AFFE_CHAR_MECA and AFFE_CHAR_MECA_F, operand FORCE_POUTRE, keywords MX, MY, MZ, MT, MT, MT, MFY and MFZ. They are applicable to straight beams with constant characteristics.

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Loads
• 2. Reference solution
  • 2.1. Torsional moment
  • 2.2. Bending moment
  • 2.3. Uncertainty about the solution
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Characteristics of the mesh
  • 3.3. Tested sizes and results
• 4. B modeling
  • 4.1. Characteristics of modeling
  • 4.2. Characteristics of the mesh
  • 4.3. Tested sizes and results
• 5. Summary of results