v2.03.107 SDLS107 — Cylinder subject to axial annular flow turbulence

Summary

This test in the field of linear dynamics of shells and plates uses the calculation of acceptance, a function intended to calculate the DSP of modal force from a DSP of pressure. This precise test uses circular or 3D shell modeling to test the Au Yang method. The compatibility of the acceptance calculation with various types of interface models is tested: Mechanical 3D, Thermal 3D and Fluid-Structure 3D.

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Material properties
  • 1.3. Boundary conditions and loads
• 2. Benchmark solution
  • 2.1. Calculation method used for the reference solution
  • 2.2. Benchmark results
  • 2.3. Bibliographical references
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Tested sizes and results
• 4. B modeling
  • 4.1. Characteristics of modeling
  • 4.2. Tested sizes and results
• 5. C modeling
  • 5.1. Characteristics of modeling
  • 5.2. Tested sizes and results
• 6. D modeling
  • 6.1. Characteristics of modeling
  • 6.2. Tested sizes and results
• 7. Summary of results