3. Modeling A#
3.1. Characteristics of modeling#
Q4 elements are used to mesh the surface of the cylinder.
The interface model between solid and fluid has the following characteristics:
Modeling: “3D”, Phenomenon: “Thermal”
Modeling: “3D”, Phenomenon: “Mechanics”
Modeling: “FLUI_STRU”, Phenomenon: “Mechanics”
3.2. Tested sizes and results#
The results are tested with the three types of interfaces with a field at the nodes.
Identification |
frequency ( \(\mathit{Hz}\) ) |
Reference type |
Reference |
% tolerance |
\(\mathit{DSP}(\omega )\omega =\mathrm{0,01}\) |
1 e-02 |
“SOURCE_EXTERNE” |
252.701 |
2.0 |
\(\mathit{DSP}(\omega )\omega =0.1\) |
1 e-01 |
“SOURCE_EXTERNE” |
249.663 |
2.0 |