3. Modeling A

3.1. Characteristics of modeling

3D modeling is used.

3.2. Characteristics of the mesh

The mesh contains 54 elements of type QUAD4 and 27 elements of type HEXA8, for a total of 64 nodes.

3.3. Tested sizes and results

We test the values of the quantities DOM_LEM.

Identification	Reference		\(\text{\%}\) Tolerance
	\(s=0.8\)	\(s=1.003\)	\(s=0.8\)	\(s=1.003\)
Point 1 Harm	0.0000000	0.0000000	0.001	0.001
Point 2 Harm	0.0000000	0.0000000	0.001	0.001
Point 3 Harm	0.0000000	0.0000000	0.001	0.001
Point 4 Harm	0.0000000	0.0000000	0.001	0.001
Point 5 Harm	0.0000000	0.0000000	0.001	0.001
Point 6 Harm	0.0000000	0.0000000	0.001	0.001
Point 7 Harm	0.0000000	0.0000000	0.001	0.001
Point 8 Harm	0.0000000	0.0000000	0.001	0.001
Point 9 Harm	0.0000000	0.0000000	0.001	0.001
Point 10 Harm	0.0000000	0.0000000	0.001	0.001
Point 11 Harm	0.0000000	0.0000000	0.001	0.001
Point 12 Harm	0.0000000	0.0000000	0.001	0.001
Point 13 Harm	0.0000000	0.0000000	0.001	0.001
Point 14 Harm	0.0000000	0.0000000	0.001	0.001
Point 15 Harm	0.0054373	0.0319264	0.001	0.001
Point 16 Harm	0.0275450	0.1903340	0.001	0.001
Point 17 Harm	0.0675939	1.0000000	0.001	0.001
Point 18 Harm	0.1215430	1.0000000	0.001	0.001
Point 19 Harm	0.1873180	1.0000000	0.001	0.001
Point 20 Harm	0.2662020	1.0000000	0.001	0.001

We calculate the stress triaxiality rate, the equivalent damage stress, and the Lemaître damage at the first Gauss point of cell \({M}_{1}\):

Identification	Component	Increment	Reference
(NON_REGRESSION) »	Tolerance ( \(\text{\%}\) )
ENDO_ELGA	TRIAX	15	0.333333	0.1
ENDO_ELGA	SI_ENDO	15	1.06433 10—8	0.1
ENDO_ELGA	COENDO	15	15	5.65806 103	0.1
ENDO_ELGA	DOM_LEM	15	15	5.43728 10—3	0.1