6. D modeling#
6.1. Characteristics of modeling#
We test the criteria in formulas (find the results of the SSLv135f test case)
6.2. Characteristics of the mesh#
Meshing is not required.
6.3. Tested sizes and results#
Result obtained with the first load (SOL_NL of SSLV135F):
The reference value corresponds to*damage* (ENDO1) and the results were obtained using the Basquin formula:
Identification |
Reference type |
Reference value |
Criteria |
||
:math:`\frac{∣\mathit{EPSN1}\mathrm{-}\mathit{EPSN2}∣}{2}`
|
“ANALYTIQUE” |
1.08363973E-05 |
:math:`\frac{∣\mathit{ETPR1}\mathrm{-}\mathit{ETPR2}∣}{2}`
|
“ANALYTIQUE” |
1.0 8363973 E-0 5 |
:math:`\frac{∣\mathit{ETEQ1}\mathrm{-}\mathit{ETEQ2}∣}{2}`
|
“ANALYTIQUE” |
1.06338423E-05 |
The reference value still corresponds to*damage* (ENDO1) and the results were obtained with interpolation of the Wöhler curve:
Identification |
Reference type |
Reference value |
Criteria |
||
:math:`\frac{∣\mathit{EPSN1}\mathrm{-}\mathit{EPSN2}∣}{2}`
|
“ANALYTIQUE” |
3.26558686E-05 |
:math:`\frac{∣\mathit{ETPR1}\mathrm{-}\mathit{ETPR2}∣}{2}`
|
“ANALYTIQUE” |
3.26558686E-05 |
:math:`\frac{∣\mathit{ETEQ1}\mathrm{-}\mathit{ETEQ2}∣}{2}`
|
“ANALYTIQUE” |
3.21404432E-05 |
Result obtained with the second load (SOL_NL2 of SSLV135F):
The reference value corresponds to*damage* (ENDO1) and the results were obtained using the Basquin formula:
Identification |
Reference type |
Reference value |
Criteria |
||
:math:`\frac{∣\mathit{EPSN1}\mathrm{-}\mathit{EPSN2}∣}{2}`
|
“ANALYTIQUE” |
1.449229E-04 |
:math:`\frac{∣\mathit{ETPR1}\mathrm{-}\mathit{ETPR2}∣}{2}`
|
“ANALYTIQUE” |
|
:math:`\frac{∣\mathit{ETEQ1}\mathrm{-}\mathit{ETEQ2}∣}{2}`
|
“ANALYTIQUE” |
6.5320499E-05 |
The reference value still corresponds to*damage* (ENDO1) and the results were obtained with interpolation of the Wöhler curve:
Identification |
Reference type |
Reference value |
Criteria |
||
:math:`\frac{∣\mathit{EPSN1}\mathrm{-}\mathit{EPSN2}∣}{2}`
|
“ANALYTIQUE” |
2.408735E-04 |
:math:`\frac{∣\mathit{ETPR1}\mathrm{-}\mathit{ETPR2}∣}{2}`
|
“ANALYTIQUE” |
2.408735 E-0 4 |
Result obtained with the third load (SOL_NL3 of SSLV135F):
The reference value corresponds to*damage* (ENDO1) and the results were obtained using the Basquin formula:
Identification |
Reference type |
Reference value |
Criteria |
||
:math:`\frac{∣\mathit{EPPR1}\mathrm{-}\mathit{EPPR2}∣}{2}`
|
“ANALYTIQUE” |
1.377855E-02 |
The reference value still corresponds to*damage* (ENDO1) and the results were obtained with interpolation of the Wöhler curve:
Identification |
Reference type |
Reference value |
Criteria |
||
:math:`\frac{∣\mathit{EPPR1}\mathrm{-}\mathit{EPPR2}∣}{2}`
|
“ANALYTIQUE” |
2.1858445E-03 |