5. C modeling#
5.1. Characteristics of modeling#
We test the criteria in formulas (find the results of test case SSLV135E)
5.2. Characteristics of the mesh#
Meshing is not required.
5.3. Tested sizes and results#
The reference value corresponds to*damage* t (ENDO1) and the results were obtained using the Basquin formula:
Identification |
Reference type |
Reference value |
Criteria |
||
:math:`\frac{∣\mathit{SIPR1}\mathrm{-}\mathit{SIPR2}∣}{2}`
|
“ANALYTIQUE” |
1.0707149E-03 |
:math:`\frac{∣\mathit{SITN1}\mathrm{-}\mathit{SITN2}∣}{2}`
|
“ANALYTIQUE” |
1.0707149E-03 |
:math:`\frac{\mathit{SIPN1}\mathrm{-}\mathit{SIPN2}}{2}`
|
“ANALYTIQUE” |
1.0707149E-03 |
:math:`\frac{\mathit{SIGEQ1}\mathrm{-}\mathit{SIGEQ2}}{2}`
|
“ANALYTIQUE” |
4.287285E-03 |
The reference value still corresponds to*damage* (ENDO1) and the results were obtained with interpolation of the Wöhler curve:
Identification |
Reference type |
Reference value |
Criteria |
||
:math:`\frac{∣\mathit{SIPR1}\mathrm{-}\mathit{SIPR2}∣}{2}`
|
“ANALYTIQUE” |
1.9212572E-03 |
:math:`\frac{∣\mathit{SITN1}\mathrm{-}\mathit{SITN2}∣}{2}`
|
“ANALYTIQUE” |
1.9212572E-03 |
:math:`\frac{\mathit{SIPN1}\mathrm{-}\mathit{SIPN2}}{2}`
|
“ANALYTIQUE” |
1.9212572E-03 |
:math:`\frac{\mathit{SIGEQ1}\mathrm{-}\mathit{SIGEQ2}}{2}`
|
“ANALYTIQUE” |
5.8175699E-03 |