3. Modeling A#

3.1. Characteristics of modeling#

The models tested are DIS_T and DIS_TR on meshes and dots. The stiffness characteristics of the discretes are therefore of the type: K_T_D_L, K_ TR_D_L, K_T_D_N, K_ TR_D_N.

3.2. Characteristics of the mesh#

Number of knots: 6, number of stitches: 4, elements SEG2: 2, elements POI1: 2.

3.3. Boundary conditions and loads#

The condition while on the move is a function of time:

3.4. Tested sizes and results#

The quantities tested are displacement, effort, and internal variables.

Tolerances are by default.

_images/100000000000034A000002539491C5FF657A2A0C.png

Figure 3.4-a : Comparison of force-displacement response.

_images/100000000000034A0000025367A8113A6700986B.png

Figure 3.4-b : Comparison of anelastic displacement vs time.

_images/100000000000034A00000253A9EA36976209DB34.png

Figure 3.4-c : Comparison of cumulative anelastic displacement vs time.

_images/100000000000034A000002532ECA5E87547AB27E.png

Figure 3.4-d : comparison of dissipation vs time.