Modeling A
==============

Characteristics of modeling
-----------------------------------

The models tested are DIS_T and DIS_TR on meshes and dots. The stiffness characteristics of the discretes are therefore of the type: K_T_D_L, K_ TR_D_L, K_T_D_N, K_ TR_D_N.


Characteristics of the mesh
----------------------------

Number of knots: 6, number of stitches: 4, elements SEG2: 2, elements POI1: 2.


Boundary conditions and loads
-------------------------------------

The condition while on the move is a function of time:


Tested sizes and results
------------------------------

The quantities tested are displacement, effort, and internal variables.

Tolerances are by default.


.. image:: images/100000000000034A000002539491C5FF657A2A0C.png
    :width: 3.9366in
    :height: 2.7756in


.. _RefImage_100000000000034A000002539491C5FF657A2A0C.png:

**Figure** 3.4-a **: Comparison of force-displacement response.**


.. image:: images/100000000000034A0000025367A8113A6700986B.png
    :width: 3.9366in
    :height: 2.7756in


.. _RefImage_100000000000034A0000025367A8113A6700986B.png:

**Figure** 3.4-b **: Comparison of anelastic displacement vs time.**


.. image:: images/100000000000034A00000253A9EA36976209DB34.png
    :width: 3.9366in
    :height: 2.7756in


.. _RefImage_100000000000034A00000253A9EA36976209DB34.png:

**Figure** 3.4-c **: Comparison of cumulative anelastic displacement vs time.**


.. image:: images/100000000000034A000002532ECA5E87547AB27E.png
    :width: 3.9366in
    :height: 2.7756in


.. _RefImage_100000000000034A000002532ECA5E87547AB27E.png:

**Figure** 3.4-d **: comparison of dissipation vs time.**