10. Modeling E#
10.1. Characteristics of modeling#
Simulation at the hardware point.
10.2. Tested sizes and results#
The solutions are post-treated at the single point of the model and compared to non-regression values in terms of the number of liquefaction cycles \(\mathit{NCYCL}\) for:
Criterion number 1: \(\text{RU\_MAX}=0.705\)
Identification |
Reference type |
Reference value |
Tolerance |
\(\text{PRES\_CONF}=50\mathit{kPa}\) |
“NON_REGRESSION” |
0 |
|
\(\text{PRES\_CONF}=100\mathit{kPa}\) |
“NON_REGRESSION” |
1 |
|
\(\text{PRES\_CONF}=150\mathit{kPa}\) |
“NON_REGRESSION” |
1 |
|
Criterion number 2: \(\text{RU\_MAX}=0.705\phantom{\rule{2em}{0ex}}+\phantom{\rule{2em}{0ex}}\text{EPSI\_ABSO\_MAX}=5\text{\%}\)
Identification |
Reference type |
Reference value |
Tolerance |
\(\text{PRES\_CONF}=50\mathit{kPa}\) |
“NON_REGRESSION” |
0 |
|
\(\text{PRES\_CONF}=100\mathit{kPa}\) |
“NON_REGRESSION” |
3 |
|
\(\text{PRES\_CONF}=150\mathit{kPa}\) |
“NON_REGRESSION” |
1 |
|