Modeling E
==============


Characteristics of modeling
-----------------------------------

Simulation at the hardware point.


Tested sizes and results
------------------------------

The solutions are post-treated at the single point of the model and compared to non-regression values in terms of the number of liquefaction cycles :math:`\mathit{NCYCL}` for:

Criterion number 1: :math:`\text{RU\_MAX}=0.705`


.. csv-table::

    "**Identification**", "**Reference type**", "**Reference value**", "**Tolerance**"
    ":math:`\text{PRES\_CONF}=50\mathit{kPa}` ", "'NON_REGRESSION'", "0"," 0.0001%"
    ":math:`\text{PRES\_CONF}=100\mathit{kPa}` ", "'NON_REGRESSION'", "1"," 0.0001%"
    ":math:`\text{PRES\_CONF}=150\mathit{kPa}` ", "'NON_REGRESSION'", "1"," 0.0001%"


Criterion number 2: :math:`\text{RU\_MAX}=0.705\phantom{\rule{2em}{0ex}}+\phantom{\rule{2em}{0ex}}\text{EPSI\_ABSO\_MAX}=5\text{\%}`


.. csv-table::

    "**Identification**", "**Reference type**", "**Reference value**", "**Tolerance**"
    ":math:`\text{PRES\_CONF}=50\mathit{kPa}` ", "'NON_REGRESSION'", "0"," 0.0001%"
    ":math:`\text{PRES\_CONF}=100\mathit{kPa}` ", "'NON_REGRESSION'", "3"," 0.0001%"
    ":math:`\text{PRES\_CONF}=150\mathit{kPa}` ", "'NON_REGRESSION'", "1"," 0.0001%"