2. Reference solution#

2.1. Calculation method#

The reference data are retrieved from a simulation of the same test with a globalized behavior law GLRC_DM [bib4]. The [] illustrates the results of this simulation in relation to the experimental data.

_images/100000000000045B0000022C115DFBA83DE03C19.jpg

Figure 2.1-a : Comparison of experimental data for alternating static loading on the T5 model with a simulation using GLRC_DM **

2.2. Reference quantities and results#

The quantities tested are the efforts and the movements at moments \(t\mathrm{=}\mathrm{0,03}s\) and \(t=\mathrm{0,0495}s\). The data is summarized in the [].

Instant (\(s\))

Force (\(\mathit{MN}\))

0.03

1.07976

0.0495

1.32921

Table 2.2-1 : Quantities tested

2.3. Uncertainty about the solution#

Digital solutions.

2.4. Bibliographical references#

    1. PEGON, G. MAGONETTE, F.J. MOLINA, G. VERZELETTI, G., T., T. DYNGELAND, T., P., P. TOGNOLI, « Program SAFE: Test Report T5 », Structural Mechanics Unit, Institute of Systems, Informatics and Security, Institute of Systems, Informatics and Security, Institute of Systems, Informatics and Security, Institute of Systems, Informatics and Security, Joint Research Center, Joint Research Center, European Commission, 21020 NEGRO TIRELLI Ispra (Varese), Italy

  2. [R7.01.04-C], Law of Behaviour ENDO_ISOT_BETON

  3. [R3.08.07-A], Reinforcement grid elements GRILLE_MEMBRANE

    1. GHAVANIAM, S. MOULIN, « Modeling the T5 structure of the SAFE program using Code_Aster® », EDF R&D, H-T62-2006-04624-FR, 2006.