5. C modeling#

5.1. Characteristics of modeling#

It is a 3D_SI modeling.

5.2. Characteristics of the mesh#

The mesh is unstructured and includes 1550 quadratic tetrahedra (TETRA10).

_images/1000000000000547000002E2ACD65ED833B3680F.png

5.3. Quantities tested and results of the C modeling#

The stress, the plastic deformation and the displacement at the end of the loading phase are tested at the point \(r={R}_{\mathit{ext}}\), \(z=H\) (on the front side, so that \({e}_{r}={e}_{x}\text{}\) and \({e}_{\theta }={e}_{y}\)).

Identification

Reference

Type

Tolerance

SIXX

158.578 MPa

ANALYTIQUE

RELATIF \({10}^{-3}\)

DX

-1.291mm

ANALYTIQUE

RELATIF \({10}^{-3}\)

DZ

4.484mm

ANALYTIQUE

RELATIF \({10}^{-3}\)

V7 (EPSPXZ)

\(3.75\times {10}^{-2}\)

ANALYTIQUE

RELATIF \({10}^{-3}\)