C modeling
==============


Characteristics of modeling
------------------------

It is a 3D_SI modeling.


Characteristics of the mesh
----------------------------

The mesh is unstructured and includes 1550 quadratic tetrahedra (TETRA10).


.. image:: images/1000000000000547000002E2ACD65ED833B3680F.png
    :width: 2.1925in
    :height: 2.5252in


.. _RefImage_1000000000000547000002E2ACD65ED833B3680F.png:


Quantities tested and results of the C modeling
----------------------------------------

The stress, the plastic deformation and the displacement at the end of the loading phase are tested at the point :math:`r={R}_{\mathit{ext}}`, :math:`z=H` (on the front side, so that :math:`{e}_{r}={e}_{x}\text{}` and :math:`{e}_{\theta }={e}_{y}`).


.. csv-table::

    "**Identification**", "**Reference**", "**Type**", "**Tolerance**"
    "SIXX ", "158.578 MPa "," ANALYTIQUE "," RELATIF :math:`{10}^{-3}`"
    "DX", "-1.291mm", "ANALYTIQUE "," RELATIF :math:`{10}^{-3}`"
    "DZ", "4.484mm", "ANALYTIQUE "," RELATIF :math:`{10}^{-3}`"
    "V7 (EPSPXZ)", ":math:`3.75\times {10}^{-2}` "," ANALYTIQUE "," RELATIF :math:`{10}^{-3}`"