v6.04.169 SSNV169 - Creep — damage coupling

Summary:

This is an elementary non-regression test to validate the coupling between the natural creep model BETON_UMLV_FP and the damage models ENDO_ISOT_BETON and MAZARS. The test consists in maintaining a constant effort on an element and letting it flow.

• 1. Reference problem
  • 1.1. Geometry and boundary conditions
  • 1.2. Material properties
  • 1.3. Boundary conditions and loads
• 2. Benchmark solution
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Characteristics of the mesh
  • 3.3. Tested sizes and results
• 4. B modeling
  • 4.1. Characteristics of modeling
  • 4.2. Characteristics of the mesh
  • 4.3. Tested sizes and results
• 5. C modeling
  • 5.1. Characteristics of modeling
  • 5.2. Characteristics of the mesh
  • 5.3. Tested sizes and results
• 6. D modeling
  • 6.1. Characteristics of modeling
  • 6.2. Characteristics of the mesh
  • 6.3. Tested sizes and results
• 7. E modeling
  • 7.1. Characteristics of modeling
  • 7.2. Characteristics of the mesh
  • 7.3. Tested sizes and results
• 8. F modeling
  • 8.1. Characteristics of modeling
  • 8.2. Characteristics of the mesh
  • 8.3. Tested sizes and results
• 9. Synthesis