7. E modeling#
7.1. Characteristics of modeling#
The modeling is \(\mathrm{2D}\) in plane deformations D_ PLAN.
7.2. Characteristics of the mesh#
Number of knots: 4 |
|
Number of meshes: |
1 QUAD 4 |
7.3. Tested sizes and results#
The results obtained at the last moment (NUME_ORDRE 85) are compared with those of the 3D calculation of the D modeling.
At the last time step (NUME_ORDRE 85), the stress SIXX, as well as 2 internal variables V3 and V22 corresponding respectively to the reversible deviatoric deformation following \(\mathrm{XX}\) and the damage value, are tested. These quantities are observed at the first Gauss point (all fields being uniform). We also test the value of the displacement at node \(\mathrm{N1}\).
Field |
Component |
Point |
Reference Value |
Reference Type |
Tolerance |
SIEF_ELGA |
|
Gauss point 1 |
1.38880E +00 |
|
|
DEPL |
DX |
\(\mathrm{N1}\) |
-6.813E-3 |
|
|
VARI_ELGA |
V22 |
Gauss Point 1 |
7.466E-2 |
|
|
VARI_ELGA |
V3 |
Gauss Point 1 |
1.015E-5 |
|
|