8. F modeling#
8.1. Characteristics of modeling#
Modeling in plane constraints C_ PLAN.
8.2. Characteristics of the mesh#
Number of knots: 4 |
|
Number of meshes: |
1 QUAD 4 |
8.3. Tested sizes and results#
At the last time step (NUME_ORDRE 85), the stress SIXX, as well as 2 internal variables V3 and V22 corresponding respectively to the reversible deviatoric deformation following \(\mathrm{XX}\) and the damage value, are tested. These quantities are observed at the first Gauss point (all fields being uniform). We also test the value of the displacement at node \(\mathrm{N1}\).
Field |
Component |
Point |
Reference Value |
Reference Type |
Tolerance |
SIEF_ELGA |
|
Gauss point 1 |
1.388 |
|
1% |
DEPL |
DX |
\(\mathrm{N1}\) |
|
|
1% |
VARI_ELGA |
V22 |
Gauss Point 1 |
6.075E-2 |
|
1% |
VARI_ELGA |
V3 |
Gauss Point 1 |
1.0145E-5 |
|
1% |