v6.03.153 SSNP153 - 2D deformable-deformable friction contact in large deformations (shallow ironing)

Summary:

This test models the indentation of a solid mass by an awl. The 2 bodies are elastic, deformable and obey a kinematics of large deformations. This test verifies that friction is taken into account in 2D.

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Material properties
  • 1.3. Boundary conditions and loads
  • 1.4. Initial conditions
• 2. Benchmark solution
  • 2.1. Calculation method
  • 2.2. Reference quantities and results
  • 2.3. Bibliographical references
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Characteristics of the mesh
  • 3.3. Tested sizes and results
• 4. Summary of results