3. Modeling A#
3.1. Characteristics of modeling A#
D_ PLAN modeling.
Behaviour of DRUCK_PRAGER with linear negative work hardening.
Number of nodes |
\(4\) |
|||
Number of meshes |
\(5\) |
That is: |
||
SEG2 |
|
|||
QUAD4 |
|
The square is in space \([0.\mathrm{,1}\mathrm{.}]\times [0.\mathrm{,1}\mathrm{.}]\).
Coordinates of points \((m)\):
\(A:(0.,0.)\)
\(B:(1.,0.)\)
\(C:(1.,1.)\)
\(D:(0.,1.)\)
Node groups:
\(A,B\)
Meshes
\(\mathrm{M1}\): surface \(\mathrm{ABDC}\)
\(\mathrm{M2}\): segment \(\mathrm{AB}\)
\(\mathrm{M3}\): segment \(\mathrm{BC}\)
\(\mathrm{M4}\): segment \(\mathrm{CD}\)
\(\mathrm{M5}\): segment \(\mathrm{DA}\)
3.2. Results#
Grandeur |
Point |
\(\mathrm{Inst}\) |
Reference |
Tolerance (\(\text{\%}\)) |
\(\mathrm{SIXX}(\mathrm{Pa})\) |
\(C\) |
\(2.0\) |
\(-2.0\mathrm{E6}\) |
0.1 |
\(\mathrm{SIYY}(\mathrm{Pa})\) |
\(C\) |
\(1.07\) |
\(-8.69\mathrm{E6}\) |
0.1 |
\(1.16\) |
\(-1.39\mathrm{E7}\) |
0.1 |
||
\(1.34\) |
\(-9.90\mathrm{E6}\) |
0.1 |
||
\(1.53\) |
\(-9.91\mathrm{E6}\) |
0.1 |
||
\(\mathrm{V1}\) |
\(C\) |
\(1.07\) |
\(0\) |
0.1 |
\(1.16\) |
\(1.20E-3\) |
0.1 |
||
\(1.34\) |
\(1.12E-2\) |
0.1 |
||
\(1.53\) |
\(2.01E-2\) |
0.1 |
||
\(\mathrm{DY}(m)\) |
\(C\) |
\(1.07\) |
\(-1.05E-3\) |
0.1 |
\(1.16\) |
\(-2.40E-3\) |
0.1 |
||
\(1.34\) |
\(-5.10E-3\) |
0.1 |
||
\(1.53\) |
\(-7.95E-3\) |
0.1 |