3. Modeling A#
3.1. Characteristics of modeling#
The bar is modeled by bar elements.
3.2. Characteristics of the mesh#
Four SEG2 stitches.
3.3. Tested sizes and results#
The quantities tested are listed in the table below.
Test Quantity |
Reference Type |
Reference Value |
Tolerance Allowance |
\({\sigma }_{B}\) |
Analytics |
\(190\mathit{MPa}\) |
|
\({\varepsilon }_{B}\) |
Analytics |
0.01 |
|
Table 3.1: Results of modeling A