Modeling A
==============


Characteristics of modeling
-----------------------------------

The bar is modeled by bar elements.


Characteristics of the mesh
----------------------------

Four SEG2 stitches.


Tested sizes and results
------------------------------

The quantities tested are listed in the table below.


.. csv-table::

    "**Test Quantity**", "**Reference Type**", "**Reference Value**", "**Tolerance Allowance**"
    ":math:`{\sigma }_{B}` ", "Analytics", ":math:`190\mathit{MPa}` "," 0.10%"
    ":math:`{\varepsilon }_{B}` ", "Analytics", "0.01"," 0.10%"


Table 3.1: Results of modeling A