5. C modeling#
5.1. Characteristics of modeling#
The modeling used in the test case is as follows:
Elements \(\mathrm{2D}\) “ AXIS “ ( QUA4 )
Figure 5.1-a :: ****Geometry and mesh of the modeling used. **
Cutting: 1 QUAD4 mesh along the \(x\) axis
1 QUAD4 mesh along the \(y\) axis
Knots:
\(A\): knit \(\mathrm{M1}\) knot \(\mathrm{N1}\)
\(B\): knit \(\mathrm{M1}\) knot \(\mathrm{N2}\)
\(C\): knit \(\mathrm{M1}\) knot \(\mathrm{N3}\)
\(D\): knit \(\mathrm{M1}\) knot \(\mathrm{N4}\)
5.2. Characteristics of the mesh#
Number of knots: 4
Number of meshes and types: 1 QUAD4, 3 SEG2.
5.3. Tested sizes and results#
Identification |
Field |
Size |
Reference |
Tolerance |
|
\(t=\mathrm{0.1s}\) \(\mathrm{M1}\) \(\mathrm{N2}\) |
|
|
1.05722838E-02 |
1.0E -04% |
|
\(t=\mathrm{0.1s}\) \(\mathrm{M1}\) Point 1 |
|
V4 |
V4 |
1.05722838E-02 |
1.0E-04% |
\(t=\mathrm{1s}\) \(\mathrm{M1}\) \(\mathrm{N2}\) |
|
|
1.15572282E-01 |
1.0E -04% |
|
\(t=\mathrm{1s}\) \(\mathrm{M1}\) Point 1 |
|
V4 |
V4 |
1.15572282E-01 |
1.0E -04% |