4. B modeling#

4.1. Characteristics of modeling#

The models tested are DIS_T on SEG2 meshes. The characteristics of the discretes are of the type: K_T_D_L, M_T_D_L.

4.2. Characteristics of the mesh#

Number of knots: 2, number of stitches: 2, elements SEG2: 2.

4.3. Boundary conditions and loads#

Node N2 is stuck: \(\mathit{DX}=\mathit{DY}=\mathit{DZ}=0\).

Node N1 is free in the X direction and locked in Y and Z direction: \(\mathit{DY}=\mathit{DZ}=0\).

A displacement is imposed on the node N 1 in the direction X. This load is a ramp that allows the node to be moved with a stat_non_line and then to simulate a release test with a dyna_non_line.

4.4. Tested sizes and results#

The quantity tested is effort. Tolerances are by default.

The tests consist in recovering the movements of the node N1, calculating the effort using the law of behavior and comparing this effort with that calculated by code_aster. The tests are carried out at all archived moments.

_images/100002010000093A0000062641E32896EC7A0B93.png

Figure 4.4-a :: ** Force vs displacement behavior of the non-linear device.

_images/100002010000093A00000626C3C3E752F1251C7A.png

Figure 4.4-b : Force response and movement as a function of time at the node N1.