v3.04.131 SSLV131 - Orthotropy in any coordinate system

Summary

This test case validates linear elasticity models that use orthotropic materials whose properties are known in a user-defined coordinate system that is different from the global coordinate system.

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Material properties
  • 1.3. Boundary conditions and loads
• 2. Benchmark solution
  • 2.1. Calculation method
  • 2.2. Benchmark results
  • 2.3. Uncertainties about the solution
  • 2.4. Bibliographical references
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Characteristics of the mesh
  • 3.3. Tested values
• 4. Summary of results