v3.04.114 SSLV114 - 2D and 3D solid body movements

Summary:

This test validates (in 2D and 3D) the LIAISON_SOLIDE keyword from the AFFE_CHAR_MECA command.

This keyword is used to rigidify a set of nodes by linear relationships expressing that the displacements of the « rigidified » nodes are linked together by the equation:

\(U(M)\mathrm{=}U(A)+\Omega (A)\mathrm{\wedge }\mathit{AM}\)

This equation is only valid for small trips.

The problem tests 2D and 3D as well as special cases:

• nodes combined geometrically (2D and 3D),

• aligned knots (in 3D).

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Material properties
  • 1.3. Boundary conditions and loads
• 2. Benchmark solution
  • 2.1. Calculation method used for the reference solution
  • 2.2. Benchmark results
  • 2.3. Uncertainty about the solution
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Characteristics of the mesh
  • 3.3. Tested values
• 4. B modeling
  • 4.1. Characteristics of modeling
  • 4.2. Characteristics of the mesh
  • 4.3. Tested values
• 5. Summary of results