3. Modeling A#
3.1. Characteristics of modeling#
The finite elements affected on the mesh cells are those of the D_ PLAN and 3D models. The degrees of freedom carried by the knots are therefore:
\(\mathrm{DX}\), \(\mathrm{DY}\) in 2D,
\(\mathrm{DX}\), \(\mathrm{DY}\), \(\mathrm{DZ}\) in 3D
3.2. Characteristics of the mesh#
Number of knots: 21
Number of meshes and types: 1 QUAD4, 1 HEXA8, 8 SEG2
3.3. Tested values#
Identification |
Reference |
\(\mathrm{DX}(C)\) |
1.999 |
\(\mathrm{DY}(C)\) |
3.001 |
2D \(\mathrm{DX}(\mathrm{E2})\) |
2.000 |
\(\mathrm{DY}(\mathrm{E2})\) |
3.000 |
\(\mathrm{DX}(L)\) |
1.999 |
3D \(\mathrm{DY}(L)\) |
3.002 |
\(\mathrm{DZ}(L)\) |
3.999 |
\(\mathrm{DX}(P)\) |
1.998 |
\(\mathrm{DY}(P)\) |
3.001 |
\(\mathrm{DZ}(P)\) |
4.000 |
\(\mathrm{DX}(\mathrm{Q3})\) |
2.000 |
\(\mathrm{DY}(\mathrm{Q3})\) |
3.000 |
\(\mathrm{DZ}(\mathrm{Q3})\) |
4.000 |