4. B modeling

4.1. Characteristics of modeling

It is a C_ PLANpour modeling the volume and PLAN_INTERFACE_Spour the interface.

4.2. Characteristics of the mesh

The « volume » mesh is composed of 10 TRIA6 meshes, the interface mesh is composed of 3 QUAD8 meshes.

4.3. Quantities tested and results of modeling A

The two components DX and DY of the displacement at the top of the coordinate square \(x=y=1000\) are tested for the two values +2 MPa and -2 MPa of the applied force \({\sigma }_{0}\) and for each of the six combinations of adhesion conditions (i.e. \(2\times 2\times 6=24\) values tested). The precision selected is that by default.

All the results are in line with expectations.