3. Modeling A

3.1. Characteristics of modeling

It is a 3D modeling for the volume and 3D_ INTERFACE_Spour the interface.

3.2. Characteristics of the mesh

The volume mesh is composed of 80 TETRA10 meshes, the interface mesh is composed of 10 PENTA15 meshes.

3.3. Quantities tested and results of modeling A

The three components DX, DY and DZ of the displacement at the top of the cube with coordinates \(x=y=z=1000\) are tested for the two values +2 MPa and -2 MPa of the applied force \({\sigma }_{0}\) and for each of the six combinations of adhesion conditions (i.e. \(3\times 2\times 6=36\) values tested). The precision selected is that by default.

All the results are in line with expectations.