B modeling
==============


Characteristics of modeling
------------------------

It is a C_ PLANpour modeling the volume and PLAN_INTERFACE_Spour the interface.


Characteristics of the mesh
----------------------------

The "volume" mesh is composed of 10 TRIA6 meshes, the interface mesh is composed of 3 QUAD8 meshes.


Quantities tested and results of modeling A
----------------------------------------

The two components DX and DY of the displacement at the top of the coordinate square :math:`x=y=1000` are tested for the two values +2 MPa and -2 MPa of the applied force :math:`{\sigma }_{0}` and for each of the six combinations of adhesion conditions (i.e. :math:`2\times 2\times 6=24` values tested). The precision selected is that by default.

All the results are in line with expectations.