Modeling A
==============


Characteristics of modeling
------------------------

It is a 3D modeling for the volume and 3D_ INTERFACE_Spour the interface.


Characteristics of the mesh
----------------------------

The volume mesh is composed of 80 TETRA10 meshes, the interface mesh is composed of 10 PENTA15 meshes.


Quantities tested and results of modeling A
----------------------------------------

The three components DX, DY and DZ of the displacement at the top of the cube with coordinates :math:`x=y=z=1000` are tested for the two values +2 MPa and -2 MPa of the applied force :math:`{\sigma }_{0}` and for each of the six combinations of adhesion conditions (i.e. :math:`3\times 2\times 6=36` values tested). The precision selected is that by default.

All the results are in line with expectations.