v3.03.145 SSLS145 - Calculation of the reinforcement of a flat plate loaded in its plane

Summary:

The objective of this test is to validate the macro command COMBINAISON_FERRAILLAGE which calculates the dimensioning reinforcement density between several load cases.

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Material properties
  • 1.3. Boundary conditions and loads
  • 1.4. Initial conditions
• 2. Benchmark solution
  • 2.1. Calculation method
  • 2.2. Reference quantities and results
  • 2.3. Uncertainty about the solution
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Characteristics of the mesh
  • 3.3. Tested sizes and results
• 4. Summary of results