v3.03.101 SSLS101 - Circular plate placed under uniform pressure

Summary:

We treat the case of a circular plate placed on the edge in linear elasticity under 3 loads (self-weight, pressure, constant distributed force) which give the same deformation.

The first two models make it possible to evaluate the influence of the mesh.

The test includes 8 models (Love-Kirchhoff, Mindlin-Reissner and COQUE_3D models) plus 3 « connection » models between shells or between shells and 3D.

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Material properties
  • 1.3. Boundary conditions and loads
• 2. Benchmark solution
  • 2.1. Calculation method used for the reference solution
  • 2.2. Benchmark results
  • 2.3. Uncertainty about the solution
  • 2.4. Bibliographical references
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Characteristics of the mesh
  • 3.3. Tested sizes and results
• 4. B modeling
  • 4.1. Characteristics of modeling
  • 4.2. Characteristics of the mesh
  • 4.3. Tested sizes and results
• 5. Modeling E
  • 5.1. Characteristics of modeling
  • 5.2. Characteristics of the mesh
  • 5.3. Tested sizes and results
• 6. F modeling
  • 6.1. Characteristics of modeling
  • 6.2. Characteristics of the mesh
  • 6.3. Tested sizes and results
• 7. G modeling
  • 7.1. Characteristics of modeling
  • 7.2. Characteristics of the mesh
  • 7.3. Tested sizes and results
• 8. H modeling
  • 8.1. Characteristics of modeling
  • 8.2. Characteristics of the mesh
  • 8.3. Tested sizes and results
• 9. Modeling I
  • 9.1. Characteristics of modeling
  • 9.2. Characteristics of the mesh
  • 9.3. Tested sizes and results
  • 9.4. notes
• 10. J modeling
  • 10.1. Characteristics of modeling
  • 10.2. Characteristics of the mesh
  • 10.3. Tested sizes and results
  • 10.4. notes
• 11. M modeling
  • 11.1. Characteristics of modeling
  • 11.2. Tested sizes and results
• 12. N modeling
  • 12.1. Characteristics of modeling
  • 12.2. Tested sizes and results
• 13. O modeling
  • 13.1. Characteristics of modeling
  • 13.2. Tested sizes and results
• 14. Summary of results