5. C modeling#
5.1. Characteristics of C modeling#
Young’s module \(E=5\times {10}^{11}\mathit{Pa}\).
For the rest, see Modeling A.
5.2. Characteristics of the mesh#
See Modeling A.
5.3. Tested sizes and results#
Size |
Reference Value |
Reference Type |
Tolerance (%) |
G |
\(181.7\) |
“SOURCE_EXTERNE” |
\(2.44\) |
G |
\(181.7\) |
“SOURCE_EXTERNE” |
\(1.27\) |
G |
\(181.7\) |
“SOURCE_EXTERNE” |
\(1.22\) |
G |
\(181.7\) |
“SOURCE_EXTERNE” |
\(1.29\) |
G_ IRWIN |
|
“SOURCE_EXTERNE” |
\(4.16\) |
G_ IRWIN |
|
“SOURCE_EXTERNE” |
\(1.27\) |
G_ IRWIN |
|
“SOURCE_EXTERNE” |
\(1.23\) |
G_ IRWIN |
|
“SOURCE_EXTERNE” |
\(1.38\) |
G_ IRWIN |
|
“SOURCE_EXTERNE” |
\(1.22\) |
The results obtained are consistent with those from CASTEM_2000.
The maximum difference for this model is :math:`mathrm{4,16}`%.