v3.02.303 SSLP303 - Cantilever plate loaded at the end

Summary:

The aim of the test is to validate the keyword FORCE_CONTOUR, based on a load applied to the end of a plate. The problem is treated in plane stresses.

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Material properties
  • 1.3. Boundary conditions and loads
  • 1.4. Boundary conditions and loads
• 2. Benchmark solution
  • 2.1. Calculation method used for the reference solution
  • 2.2. Benchmark results
  • 2.3. Uncertainty about the solution
  • 2.4. Bibliographical references
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Characteristics of the mesh
  • 3.3. Tested values
  • 3.4. notes
• 4. Summary of results