v2.03.113 SDLS113 — Plate in plane deformation under harmonic pressure

Summary:

The objective of this test case is to validate the calculation of a plate in plane deformation (D_ PLAN) subjected to a sinusoidal pressure using a harmonic calculation.

To do this, two calculations are carried out on the same model, a harmonic calculation and a transitory calculation. The transitory calculation is used as a reference.

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Elastic properties of the material
  • 1.3. Boundary conditions and loads
• 2. Benchmark solution
  • 2.1. Calculation method
  • 2.2. Reference quantities and results
  • 2.3. Uncertainties about the solution
• 3. Modeling A
  • 3.1. Characteristics of modeling A
  • 3.2. Characteristics of the mesh
  • 3.3. Tested sizes and results
• 4. B modeling
  • 4.1. Characteristics of B modeling
  • 4.2. Tested sizes and results
• 5. Summary of results