v1.01.393 ZZZZ393 - Pre-deformations by function for plates, grids and membranes

Summary:

This test validates the consideration of pre-deformations affected in the form of a function for elements DKT, DKTG, GRILLE_EXCENTRE, GRILLE_MEMBRANE and MEMBRANE.

It also validates the consideration of pre-deformations affected by value for elements GRILLE_MEMBRANE and by comparison with elements GRILLE_EXCENTRE.

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Material properties
  • 1.3. Boundary conditions and loads
• 2. Reference solution
  • 2.1. Benchmark results
  • 2.2. Uncertainty about the solution
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Calculations and loads
  • 3.3. Tested sizes and results
• 4. B modeling
• 5. C modeling
  • 5.1. Characteristics of modeling
  • 5.2. Calculations and loads
  • 5.3. Tested sizes and results
• 6. D modeling
  • 6.1. Characteristics of modeling
  • 6.2. Calculations and loads
  • 6.3. Tested sizes and results
• 7. E modeling
  • 7.1. Characteristics of modeling
  • 7.2. Calculations and loads
  • 7.3. Tested sizes and results
• 8. F modeling
  • 8.1. Characteristics of modeling
  • 8.2. Calculations and loads
  • 8.3. Tested sizes and results
• 9. G modeling
  • 9.1. Characteristics of modeling
  • 9.2. Calculations and loads
  • 9.3. Tested sizes and results
• 10. Summary of results