v1.01.333 ZZZZ333 — MODI_REPERE validation

Summary:

This test case makes it possible to validate the keywords REPERE =” COQUE_INTR_UTIL “and REPERE =” COQUE_INTR_UTIL” of the MODI_REPERE command.

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Boundary conditions and loads
  • 1.3. Initial conditions
• 2. Benchmark solution
  • 2.1. Calculation method used for the reference solution
  • 2.2. Benchmark results
  • 2.3. Uncertainty about the solution
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Characteristics of the mesh
  • 3.3. Tested sizes and results
• 4. Summary of results