4. Table produced#
The table produced depends on the shape of the defect. The parameters of the table produced are described in the following table:
Defect shape: FORM_FISS = “ELLIPSE” |
||
PARAMETRE |
TYPE |
DESCRIPTION |
GROUP_NO |
K32 |
title to specify the name of the group of nodes in question, |
INST |
R |
jiffy |
K1_ REV |
R |
elastic stress intensity factor at the crack point on the coating side (point A) |
KCP_REV |
R |
stress intensity factor with plastic correction at the crack point on the coating side (point A) |
TEMPPF_REV |
R |
Temperature at the crack point on the coating side (point A) |
K1_ MDB |
R |
Intensity factor of the elastic stresses at the crack point on the base metal side (point B) |
KCP_MDB |
R |
stress intensity factor with plastic correction at the crack point on the base metal side (point B) |
TEMPPF_MDB |
R |
Temperature at the crack point on the base metal side (point B) |
Defect shape: FORM_FISS = “SEMI_ELLIPSE” |
||
PARAMETRE |
TYPE |
DESCRIPTION |
GROUP_NO |
K32 |
title to specify the name of the group of nodes in question, |
INST |
R |
jiffy |
K1_ REV |
R |
elastic stress intensity factor at the crack point on the coating side (point A) |
KCP_REV |
R |
stress intensity factor with plastic correction at the crack point on the coating side (point A) |
TEMPPF_REV |
R |
Temperature at the crack point on the coating side (point A) |
K1_ MDB |
R |
Intensity factor of the elastic stresses at the crack point on the base metal side (point B) |
KCP_MDB |
R |
stress intensity factor with plastic correction at the crack point on the base metal side (point B) |
TEMPPF_MDB |
R |
Temperature at the crack point on the base metal side (point B) |
K1C_ REV |
R |
stress intensity factor at the crack point on the coating side (point C) |
KCPC_REV |
R |
stress intensity factor with plastic correction at the crack point on the coating side (point C) |
TEMPPC_REV |
R |
Temperature at the crack point on the coating side (point C) |