Table produced
==============

The table produced depends on the shape of the defect. The parameters of the table produced are described in the following table:


+-----------------------------------+--------+---------------------------------------------------------------------------------------------------+
|Defect shape: FORM_FISS = 'ELLIPSE'                                                                                                             |
+-----------------------------------+--------+---------------------------------------------------------------------------------------------------+
|**PARAMETRE**                      |**TYPE**|**DESCRIPTION**                                                                                    |
+-----------------------------------+--------+---------------------------------------------------------------------------------------------------+
|GROUP_NO                           |K32     |title to specify the name of the group of nodes in question,                                       |
+-----------------------------------+--------+---------------------------------------------------------------------------------------------------+
|INST                               |R       |jiffy                                                                                              |
+-----------------------------------+--------+---------------------------------------------------------------------------------------------------+
|K1_ REV                            |R       |elastic stress intensity factor at the crack point on the coating side (point A)                   |
+-----------------------------------+--------+---------------------------------------------------------------------------------------------------+
|KCP_REV                            |R       |stress intensity factor with plastic correction at the crack point on the coating side (point A)   |
+-----------------------------------+--------+---------------------------------------------------------------------------------------------------+
|TEMPPF_REV                         |R       |Temperature at the crack point on the coating side (point A)                                       |
+-----------------------------------+--------+---------------------------------------------------------------------------------------------------+
|K1_ MDB                            |R       |Intensity factor of the elastic stresses at the crack point on the base metal side (point B)       |
+-----------------------------------+--------+---------------------------------------------------------------------------------------------------+
|KCP_MDB                            |R       |stress intensity factor with plastic correction at the crack point on the base metal side (point B)|
+-----------------------------------+--------+---------------------------------------------------------------------------------------------------+
|TEMPPF_MDB                         |R       |Temperature at the crack point on the base metal side (point B)                                    |
+-----------------------------------+--------+---------------------------------------------------------------------------------------------------+


+----------------------------------------+--------+---------------------------------------------------------------------------------------------------+
|Defect shape: FORM_FISS = 'SEMI_ELLIPSE'                                                                                                             |
+----------------------------------------+--------+---------------------------------------------------------------------------------------------------+
|**PARAMETRE**                           |**TYPE**|**DESCRIPTION**                                                                                    |
+----------------------------------------+--------+---------------------------------------------------------------------------------------------------+
|GROUP_NO                                |K32     |title to specify the name of the group of nodes in question,                                       |
+----------------------------------------+--------+---------------------------------------------------------------------------------------------------+
|INST                                    |R       |jiffy                                                                                              |
+----------------------------------------+--------+---------------------------------------------------------------------------------------------------+
|K1_ REV                                 |R       |elastic stress intensity factor at the crack point on the coating side (point A)                   |
+----------------------------------------+--------+---------------------------------------------------------------------------------------------------+
|KCP_REV                                 |R       |stress intensity factor with plastic correction at the crack point on the coating side (point A)   |
+----------------------------------------+--------+---------------------------------------------------------------------------------------------------+
|TEMPPF_REV                              |R       |Temperature at the crack point on the coating side (point A)                                       |
+----------------------------------------+--------+---------------------------------------------------------------------------------------------------+
|K1_ MDB                                 |R       |Intensity factor of the elastic stresses at the crack point on the base metal side (point B)       |
+----------------------------------------+--------+---------------------------------------------------------------------------------------------------+
|KCP_MDB                                 |R       |stress intensity factor with plastic correction at the crack point on the base metal side (point B)|
+----------------------------------------+--------+---------------------------------------------------------------------------------------------------+
|TEMPPF_MDB                              |R       |Temperature at the crack point on the base metal side (point B)                                    |
+----------------------------------------+--------+---------------------------------------------------------------------------------------------------+
|K1C_ REV                                |R       |stress intensity factor at the crack point on the coating side (point C)                           |
+----------------------------------------+--------+---------------------------------------------------------------------------------------------------+
|KCPC_REV                                |R       |stress intensity factor with plastic correction at the crack point on the coating side (point C)   |
+----------------------------------------+--------+---------------------------------------------------------------------------------------------------+
|TEMPPC_REV                              |R       |Temperature at the crack point on the coating side (point C)                                       |
+----------------------------------------+--------+---------------------------------------------------------------------------------------------------+