v7.35.100 WSLP100 - Desaturation test by oozing in an unsaturated porous sample

Summary:

This test makes it possible to validate hydraulic oozing conditions. The modeling is carried out in 2D with a D_ PLAN_HHMS model and a linear elastic behavior law.

This test case contains a single model.

• 1. Reference problem
  • 1.1. Description
  • 1.2. Geometry
  • 1.3. Material properties
  • 1.4. Boundary conditions and loads
  • 1.5. Initial conditions
• 2. Benchmark solution
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Characteristics of the mesh
  • 3.3. Tested sizes and results
• 4. Summary of results