5. C modeling#
5.1. Characteristics of C modeling#
3D_HM modeling,
Behavioral law of type DRUCK_PRAG_N_A with parabolic negative work hardening:
Number of nodes |
\(20\) |
|||
Number of meshes |
\(7\) |
That is: |
||
QUAD8 |
|
|||
HEXA20 |
|
Mesh groups:
\(\mathrm{BAS}\): surface of the cube belonging to the \(Z=-0.5\) plane
\(\mathrm{HAUT}\): surface of the cube belonging to the \(Z=+0.5\) plane
\(\mathrm{DROITE}\): surface of the cube belonging to the \(Y=+0.5\) plane
\(\mathrm{GAUCHE}\): surface of the cube belonging to the \(Y=-0.5\) plane
\(\mathrm{DERRIERE}\): surface of the cube belonging to the \(X=-0.5\) plane
\(\mathrm{DEVANT}\): surface of the cube belonging to the \(X=+0.5\) plane
5.2. Results#
The results obtained are identical to those of modeling A.
Grandeur |
Point |
\(\mathrm{Inst}\) |
Reference |
Tolerance (\(\text{\%}\)) |
\(\mathrm{SIXX}(\mathrm{Pa})\) |
\(A\) |
\(1.004\) |
\(-9.69\mathrm{E5}\) |
\(0.01\) |
\(1.16\) |
\(-4.52\mathrm{E7}\) |
\(0.01\) |
||
\(1.34\) |
\(-9.59\mathrm{E7}\) |
\(0.01\) |
||
\(1.60\) |
\(-1.69\mathrm{E8}\) |
\(0.01\) |
||
\(\mathrm{SIZZ}(\mathrm{Pa})\) |
\(A\) |
\(1.004\) |
\(-4.06\mathrm{E6}\) |
\(0.01\) |
\(1.16\) |
\(-1.13\mathrm{E8}\) |
\(0.01\) |
||
\(1.34\) |
\(-2.38\mathrm{E8}\) |
\(0.01\) |
||
\(1.60\) |
\(-4.20\mathrm{E8}\) |
\(0.01\) |
||
\(\mathrm{Pre1}(\mathrm{Pa})\) |
\(A\) |
\(1.004\) |
\(1.03\mathrm{E6}\) |
\(0.01\) |
\(1.16\) |
\(-4.32\mathrm{E7}\) |
\(0.01\) |
||
\(1.34\) |
\(-9.39\mathrm{E7}\) |
\(0.01\) |
||
\(1.60\) |
\(-1.67\mathrm{E8}\) |
\(0.01\) |