v7.31.148 WTNV148 — Flow in an interface within a porous mass: use of the XFEM method

Summary:

This test verifies the opening of a cohesive hydraulic interface XFEM under the action of the injection of a fluid. The test includes two-dimensional modeling and three-dimensional modeling.

• 1. Reference problem
  • 1.1. Geometry of the problem
  • 1.2. Material properties
  • 1.3. Boundary conditions and loads
• 2. Reference quantities and results
  • 2.1. Reference quantities and results
  • 2.2. Uncertainty about the solution
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Characteristics of the mesh
  • 3.3. Tested sizes and results
  • 3.4. notes
• 4. B modeling
  • 4.1. Characteristics of modeling
  • 4.2. Characteristics of the mesh
  • 4.3. Tested sizes and results
  • 4.4. notes
• 5. Conclusion