5. C modeling

5.1. Characteristics of modeling

Modeling:

Linear 3D elements (GEOB) and MEMBRANE (GEOA) elements supported on the nodes on the underside.

Boundary conditions and thermal load:

Identical to B modeling.

5.2. Characteristics of the mesh

Meshing identical to modeling B.

5.3. Tested values and results

Values identical to modeling B.

Note:

The validation of the options EFGE_ELGA and EFGE_ELNO is done by intercomparison with the fields SIEF_ELGA and SIEF_ELNO : these fields have the same content.