7. F modeling#
7.1. Characteristics of modeling#
(7.1)#\[ \ textrm {3D modeling from the side}
1000\ mathit {mm}\]
Boundary conditions:
Side BOTTOM: DZ=0
Side LEFT: DY=0
Side BACK: DX=0
Charging:
Traction on the FRONT face + assignment of the same temperature on all knots
The total number of increments is 21 (1 increment between \(t\mathrm{=}\mathrm{0s}\) and \(\mathrm{1s}\), 20 increments between \(t\mathrm{=}\mathrm{1s}\) and \(\mathrm{2s}\))
Convergence is achieved if residue RESI_GLOB_RELA is less than or equal to 10—6.
7.2. Characteristics of the mesh#
Number of knots: 425
Number of meshes: 160
64 HEXA20 stitches
96 stitches QUAD8
7.3. Tested sizes and results#
Identification |
Reference |
Tolerance |
\(t\mathrm{=}2\) Displacement \(\mathit{DY}\) (\(N6\)) |
—110 |
|
\(t\mathrm{=}2\) Displacement \(\mathit{DX}\) (\(N6\)) |
303 |
|
\(t\mathrm{=}2\) Displacement \(\mathit{DZ}\) (\(N6\)) |
—110 |
|