5. C modeling#
5.1. Characteristics of modeling#
Boundary conditions:
\(\mathit{N2}\): \(\mathit{N1}\): |
|
Charging:
Traction on the \(\mathrm{[}34\mathrm{]}\) side (SEG2 mesh) + assignment of the same temperature on all knots
The total number of increments is 21 (1 increment between \(t\mathrm{=}\mathrm{0s}\) and \(\mathrm{1s}\), 20 increments between \(t\mathrm{=}\mathrm{1s}\) and \(\mathrm{2s}\))
Convergence is achieved if residue RESI_GLOB_RELA is less than or equal to 10—6.
5.2. Characteristics of the mesh#
Number of knots: 8
Number of meshes: 4
1 QUAD4
2 TRIA3
1 SEG2
5.3. Tested sizes and results#
Identification |
Reference |
Tolerance |
\(t\mathrm{=}2\) Displacement \(\mathit{DX}\) (\(\mathit{N3}\)) |
—110 |
1.50% |
\(t\mathrm{=}2\) Displacement \(\mathit{DY}\) (\(\mathit{N3}\)) |
303 |
1.00% |
\(t=2\) Effort \(\mathrm{NXX}\) (\(\mathrm{PG1}\)) |
1497 |
1.00% |
\(t\mathrm{=}2\) Effort \(\mathrm{NYY}\) (\(\mathit{PG1}\)) |
0.79 |
1.00% |
\(t\mathrm{=}2\) Effort \(\mathrm{NXY}\) (\(\mathit{PG1}\)) |
0.61 |
1.00% |
\(t\mathrm{=}2\) Variable
|
0.2475 |
1.50% |
