v7.14.304 HSLV304 - Cylinder under thermal loading

Summary:

The aim of the test is to validate a thermal loading that can be decomposed into 2 harmonics, applied to an axisymmetric structure (cylinder in this case).

The harmonies considered are harmonies 1 and 2.

The comparison is carried out with respect to a shell model, with finite element software.

In modeling \(B\), a deformation field \({\varepsilon }_{0}\) defined by AFFE_CHAR_MECA is imposed, corresponding to the deformation field resulting from the model \(A\). The aim is to compare the results with those obtained for model \(A\).

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Material properties
  • 1.3. Boundary conditions and loads
  • 1.4. Initial conditions
• 2. Benchmark solution
  • 2.1. Calculation method used for the reference solution
  • 2.2. Benchmark results
  • 2.3. Uncertainty about the solution
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Characteristics of the mesh
  • 3.3. Tested sizes and results
  • 3.4. note
• 4. B modeling
  • 4.1. Characteristics of modeling
  • 4.2. Characteristics of the mesh
  • 4.3. Tested sizes and results
• 5. Summary of results