v7.03.101 HPLV101 - Homogenization of homogeneous material

Summary:

In a trivial situation where the material is homogeneous, this test tests the resolution of stationary thermal and mechanical problems, with loads corresponding to a temperature gradient and to an imposed deformation, close to those corresponding to those corresponding to the elementary problems of the periodic homogenization method.

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Material properties
  • 1.3. Boundary conditions and loads
• 2. Reference solution
  • 2.1. Calculation method used for the reference solution
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Characteristics of the mesh
  • 3.3. Tested values
  • 3.4. notes
• 4. B modeling
  • 4.1. Characteristics of modeling
  • 4.2. Characteristics of the mesh
  • 4.3. Tested values
• 5. Summary of results