3. Modeling A#
3.1. Characteristics of modeling#
Deformation tensor imposed on the material point, via the SIMU_POINT_MAT command.
\({\varepsilon }_{\mathrm{yy}}=0.2\frac{t}{2000}\), in 100 increments. \({\varepsilon }_{\mathrm{xx}}={\varepsilon }_{\mathrm{zz}}=0\), \({\varepsilon }_{\mathrm{xy}}={\varepsilon }_{\mathrm{xz}}={\varepsilon }_{\mathrm{yz}}=0\)
3.2. Tested sizes and results#
3.2.1. Tested values#
Variable |
Instants \((s)\) |
Reference |
Tolerance |
\({\sigma }_{\mathrm{yy}}\) \((\mathrm{MPa})\) |
2000 |
5.98289E+02 |
|
\(\mathrm{V1}\) |
2000 |
1.18814E-01 |
|