Modeling A
==============


Characteristics of modeling
------------------------

Deformation tensor imposed on the material point, via the SIMU_POINT_MAT command.

:math:`{\varepsilon }_{\mathrm{yy}}=0.2\frac{t}{2000}`, in 100 increments. :math:`{\varepsilon }_{\mathrm{xx}}={\varepsilon }_{\mathrm{zz}}=0`, :math:`{\varepsilon }_{\mathrm{xy}}={\varepsilon }_{\mathrm{xz}}={\varepsilon }_{\mathrm{yz}}=0`


Tested sizes and results
------------------------------


Tested values
~~~~~~~~~~~~~~~~


.. csv-table::

    "**Variable**", "**Instants** :math:`(s)` ", "**Reference**", "**Tolerance**"
    ":math:`{\sigma }_{\mathrm{yy}}` :math:`(\mathrm{MPa})` ", "2000", "5.98289E+02"," 0.01%"
    ":math:`\mathrm{V1}` ", "2000", "1.18814E-01"," 0.01%"