v6.07.107 COMP007 — Thermo-mechanical validation of non-linear elastic laws (COMPORTEMENT)

Summary

This test makes it possible to validate the thermo-elastic behavior laws defined under COMPORTEMENT. It allows you to check the following points:

• Thermal expansion is well calculated (taking into account the variation of thermal expansion with temperature)

• The variation of material coefficients with temperature is correct.

The 4 validated laws of behavior are as follows:

• Modeling \(A\): this modeling makes it possible to validate the model ELAS,

• Modeling \(B\): this modeling makes it possible to validate the model ELAS_VMIS_LINE,

• Modeling \(C\): this modeling makes it possible to validate the model ELAS_VMIS_PUIS,

• Modeling \(D\): this modeling makes it possible to validate the model ELAS_VMIS_TRAC.

• 1. Methodology
• 2. Interpreting the results
• 3. Modeling A
  • 3.1. Simulation 1
  • 3.2. Simulation 2
  • 3.3. Behavioral law and material parameters
  • 3.4. Tested sizes and results
• 4. B modeling
  • 4.1. Simulation 1
  • 4.2. Simulation 2
  • 4.3. Behavioral law and material parameters
  • 4.4. Tested sizes and results
• 5. C modeling
  • 5.1. Simulation 1
  • 5.2. Simulation 2
  • 5.3. Behavioral law and material parameters
  • 5.4. Tested sizes and results
• 6. D modeling
  • 6.1. Simulation 1
  • 6.2. Simulation 2
  • 6.3. Behavioral law and material parameters
  • 6.4. Tested sizes and results
• 7. General summary of the results