3. Modeling A#

3.1. Characteristics of modeling#

We use a DKTG model. The law of behavior is GLRC_DM.

3.2. Characteristics of the mesh#

The mesh contains 4 elements of type QUAD4.

_images/10000000000002E70000013FB108272238DBC57A.png

Figure 3: Modeling mesh A.

3.3. Tested sizes and results#

We test the displacement \(\mathit{DX}\) of the node \(\mathit{BB}\) located in the center of the edge \(B\).

Identification

Reference type

Reference value

Tolerance

Instant 1.0

“SOURCE_EXTERNE”

-2.436805E-4

4%

Instant 3.0

“SOURCE_EXTERNE”

1.689212E-3

40%

Instant 5.0

“SOURCE_EXTERNE”

-3.891909E-4

1%

Instant 7.0

“SOURCE_EXTERNE”

9.398004E-4

20%

Instant 9.0

“SOURCE_EXTERNE”

-5.599223E-4

25%

Instant 11.0

“SOURCE_EXTERNE”

1.5470623E-3

3%

Instant 13.0

“SOURCE_EXTERNE”

-1.1283811E-3

5%

Instant 15.0

“SOURCE_EXTERNE”

1.9670126E-3

1%

Instant 17.0

“SOURCE_EXTERNE”

-1.3747783E-3

8%

Instant 19.0

“SOURCE_EXTERNE”

1.9887658E-3

2.5%

The axial response of the beam and the experimental results are presented.

_images/1000020100000467000002A57BE3A91832D44BA4.png

Figure 4: Modeling A response